To obtain access to full text of journal and articles you must register!
- Article name
- Using the МЕТ1003 seismic detector in experimental equipment
- Authors
- Volkov A. D., , volkov@nusun.jinr.ru, Dzhelepov Laboratory of Nuclear Problems, Joint Institute for Nuclear Research, 6 Jouly Curie str., Dubna, 141980, Russia
- Keywords
- vibration / molecular seismic detector / the electrolyte / detection cell / spectrum / Fourier series
- Year
- 2011 Issue 4 Pages 116 - 120
- Code EDN
- Code DOI
- Abstract
- A possibility of using the MET1003 molecular seismic detector in experimental equipment is examined. The detector is characterized by a high sensitivity, which is 5-10 times higher than the sensitivity of piezoelectric sensors and Bruel & Kjaer Vibro transducers. The МЕТ1003 monitor allows detection of the vibration frequency accurate to better than 0.2 Hz and amplitude accurate to better 0.1 μm in the range 1 to 200 Hz. Working temperature range of the detector is (-40÷+50) °C. Owing to its high performance and small size, the detector has a wide field of application. The investigation has been carried out at the Dzhelepov Laboratory of Nuclear Problems, Joint Institute for Nuclear Research.
- Text
- BUY for read the full text of article
- Buy
- 100.00 rub
